CP PLUS CP-SAVW-HPU4H2-65 6-Port PoE Network Switch – 4 PoE Ports, 2 Uplink Ports, 10/100 Mbps

CP PLUS CP-SAVW-HPU4H2-65 6-Port PoE Network Switch – 4 PoE Ports, 2 Uplink Ports, 10/100 Mbps The CP PLUS CP-SAVW-HPU4H2-65 is a compact and reliable PoE Network Switch with 4 PoE ports and 2 uplink ports. It supports 10/100Mbps auto-negotiation, making it ideal for powering IP cameras, VoIP phones, and wireless access points in small networks. The switch complies with IEEE802.3 and IEEE802.1W standards. It features 6KV common-mode and 4KV differential-mode surge protection for better safety. Each PoE port delivers up to 25.4W, allowing both power and data transmission over a single Ethernet cable. A built-in DIP switch lets you choose between Standard (100m) and Extend (250m) modes. In Extend mode, ports 1–4 become isolated and communicate only with uplink ports 5–6. This is ideal for long-distance surveillance setups. PoE Standard IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.1W Spanning Tree, IEEE 802.3x flow control Data Transmission Port 1×4 RJ45, 1×2 RJ45 Transmission Rate 10/100Mbps auto-negotiate Transmission Distance 10Base-T: ≤250m, 100Base-TX: ≤100m Forwarding Mode Store and forward Transmission mode Support Half/Full duplex Mode MAC Address List 4K Case space 768Kb Jumbo Frame 204 Packet Forwarding Rate 1.488Mpps@64byte Bandwidth 2 PWR (Power Indicator) Green Power Ethernet indicator Green per ethernet port DIP switch 100m: Standard mode – All ports can communicate with each other, 250m:Extend mode, port 1-4 are isolated from each other, transmission distance can up to 250m, and can communicate with port 5-6 Power Input AC100~240V, 50Hz Power Consumption Standby: ≤3W; whole: ≤96W PoE Pin Definition 1/2+, 3/6- The Port max. Rate ≤25.4W Operating Temperature -20°C ～50°C Operating Humidity 5%～95% non-condensing Dimensions 201mm × 140mm × 44mm Weight 0.7kg